Setting The Keyboard Orientation; Installing The Keypad Cover - Avigilon ACC-USB-JOY-PRO Guia De Instalacion

9. If a Windows error message appears and says that the
keyboard may not be compatible with your version of
Windows, click Continue Anyway.
When the driver installation is complete, the Joystick dialog box will
ask if you want to enable left-hand mode for the keyboard.

Setting the Keyboard Orientation

The keyboard is configured for right-hand mode by default. Right-
hand mode is when the joystick is controlled with the right hand
and the jog shuttle is controlled with the left hand. The keyboard
can be reversed for left-hand mode.
1. Rotate the keyboard until the joystick is on the left and the
jog shuttle is on the right.
2. In the Avigilon Control Center Client software, open the
Local Client Setup dialog box and click Joystick.
3. Select the Enable left-hand mode check box, then click OK.
The keyboard is now in left-hand mode.

Installing the Keypad Cover

The keypad cover is removeable so you can set the keyboard
orientation. Once the keyboard is set to either right-hand mode or
left-hand mode, install the keypad cover so the buttons are labeled
correctly.
1. Ensure the keyboard is in the correct orientation:
• Right-hand mode: jog shuttle > keypad > joystick
• Left-hand mode: joystick > keypad > jog shuttle
2. Rotate the keypad cover until the View button labels are at
the top.
3. Place the keypad cover on the keypad.
4