Esoteric Grandioso PS1 Manual Del Usuario página 9

A
DC power output connectors (DC OUT)
Use 2 DC power connection cords to connect the DC IN connec-
tors of the Grandioso K1X or Grandioso K1 with the DC power
output connectors of this unit .
With Grandioso K1X
DC OUT R A e DC IN R
DC OUT L A e DC IN L
o Use the DC power connection cords included with this unit
for connections .
With Grandioso K1
DC OUT R B e DC IN R
DC OUT L B e DC IN L
o Use the DC power connection cords provided when upgrading
the Grandioso K1 for connections .
o When connecting a Grandioso K1 to this unit, we recom-
mend putting the included protective caps on the DC OUT A
power output connectors .
o The DC power cords have arrows printed on them . Connect
them so that the arrows point in the direction shown in the
illustration on page 8 .
Check the orientation of the pins and the arrows of each
DC power cord and hold it by its plug . Align the marks on
the plug and the connector and push it in completely until
it clicks into place . When disconnecting, hold the ring and
pull it directly out . When connecting or disconnecting power
cords, do not angle or wiggle the plugs .
o Always disconnect the power plug before connecting or dis-
connecting a DC power connection cord .
o Be careful not to pinch your fingers in the ring when con-
necting or disconnecting a DC power cord .
Connector
Align the marks when connecting .
When disconnecting, hold the
ring and pull it directly out .
Plug
V
Never connect this to a P-0, P-01, Grandioso P1,
Grandioso P1X or Grandioso C1 unit. Doing so could
cause damage.
B
SIGNAL GND grounding terminal
Connecting this grounding terminal to the grounding terminal
of a D/A converter, amplifier or other device might improve the
audio quality .
o This is not a safety grounding terminal .
C
AC power inlet (~IN)
Connect the included AC power cord to this AC inlet . After com-
pleting all other connections, plug the power plug into a power
outlet .
V
Use only a genuine ESOTERIC power cord. Use of
other power cords could result in fire or electric
shock.
V
Disconnect the power plug from the outlet if you
will not use the unit for a long time.
D
LED brightness adjustment knob
Turn to adjust the brightness of the power indicator .
9