HQ W3-30025N Manual De Uso página 2

Condenser box
Thank you for buying this HQ condenser box, please take the following steps to install the box
correctly.
1. Connect the supplied air vent hose onto the condenser box, making use of the tie wrap.
2. Connect the other side of the hose onto your dryer.
3. Fill the condenser box with water till the indicated level (± 1/3).
4. Close the condenser box, check if everything is connected correctly.
5. Start you dryer. Clean the box after every use.
ATTENTION
Before you start your dryer the condenser box must be filled with the correct quantity. Check all
connections, to prevent leakage. Small rooms need to be ventilated very well, so heat and moist can
circulate properly.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos, brands or brand logos and product names are trademarks or registered trademarks of their
respective holders and are hereby recognised as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
ENGLISH
2