Maintenance; Clean Receiver - Schluter Systems LIPROTEC Manual De Uso

EN

Maintenance

9 Maintenance
Required maintenance work on receiver and remote control:
Clean the Bluetooth receiver annually.

Replace the battery in the remote control every two

years or whenever it fails.
Clean the remote control as necessary.

To do so, follow the instructions in the respective

subchapter.

9.1 Clean receiver

There is a possibility of electrical shocks when working
on an energised power pack!
Electric shocks can lead to severe or deadly injuries.
Before working on the components, make sure the

power pack is not energised.
Do not connect the power pack to the mains

connection until all connection work has been
concluded.
Remove the exterior contaminations using a soft, non-

linting dry cloth.
60
DANGER
Bluetooth receiver directions for use