Velleman MMPR1 Manual Del Usuario página 3

2. HDD Installation (see ill. on final page)
Static electricity can damage this digital recorder. Please take the
necessary precautions to avoid electrostatic discharges.
Disconnect the digital recorder BEFORE opening.
1. Turn the digital recorder upside down and unscrew the four screws.
2. Carefully remove the cover from the digital recorder. Mind the direction.
3. Remove the four screws holding the HDD holder.
4. Remove the HDD cassis. Mind the installation direction.
5. Install the HDD into the fame. Mind the installation direction.
6. Fix the HDD using the screws included with the HDD.
7. Carefully plug the power connector into the SATA. Mind the connection direction.
8. Install the frame and HDD back into the digital recorder. Fix using the four screws.
9. Make sure the wiring does not hamper the cover rims.
10. Replace the cover and fix using the screws. Replace the rubber feet.
3. Setup
Press in the main menu to enter the setup menu. Select a submenu with [Up] or [Down].
Enter the submenu with [OK].
Display: set language, TV standard and scan mode.
Config: set file and media browsing mode, firmware update and firmware version.
Clock: set year, month, day, hour and minutes.
ActiveBK: activate/deactivate the background picture when playing music.
PlayOrder: set music in repeat mode.
SlideInterval: set the slideshow interval time.
Scheduler: set the scheduled recording parameters.
Record: set the recording parameters.
MMPR1_v2
3 VELLEMAN