Ltc Audio WIKI Manual De Usuario página 2

GB
BLUETOOTH SPEAKER
Contents of the carton
1x Bluetooth speaker
1x USB DC 5V charging lead
1x manual
Charging the Bluetooth Speaker
Plug the pin of the USB 5V DC charging lead into the DC/5V socket on the rear side of the speaker. Plug the other end into a USB
port on your computer or any other device allowing USB charging.
Location of controls
1. Long press to power the speaker on and off. In play mode: Short press to pause/play music. In FM
mode: Press to start auto scan and storage of radio stations.
;
2. In play mode: Quick press for previous song Long press to decrease the volume. In FM mode: Short
press to go back to previous station. Long press to decrease the volume.
3. In play mode: Quick press for next song; Long press to increase volume. In FM mode: Short press to
go to next station. Long press to increase the volume.
4. Press to switch into Bluetooth mode or FM mode. Keep pressed to choose between 2 different light
effects in the eyes or switch the light effect off.
5. Press to answer/end a phone call. Keep pressed for 2 seconds to reject the call. Please note: The speaker must be in Bluetooth
mode to benefit from the free-hands feature.
Display: The display shows "blue" when the unit is in Bluetooth mode. The ring on top of the unit flashes while the speaker is in
pairing mode. Once paired the light will stop flashing.
In FM mode, the unit shows the tuned frequency, the memory position and the volume level when you press the buttons 2 or 3
to adjust the volume.
DC/5V socket: Connect the supplied lead to a USB port able to charge the built-in battery. The speaker works normally during
charge.
USB input: Connect a USB device up to 16Gb. The unit switches automatically into USB mode and starts playing.
TF input: Insert a micro-SD card into the TF slot. The unit switches automatically into TF mode and starts playing.
LINE IN input: If you do not have Bluetooth or do not want to use that feature, please connect a 3.5mm Auxiliary cable into the
speaker and the other end into your MP3 device to play music.
Pairing the speaker with a Bluetooth enabled device
Keep the speaker and the Bluetooth device within 1m of each other during the pairing process. Press the switch (1). The top ring
will flash and the unit is in pairing mode. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth
devices. When the Bluetooth device finds the speaker, select WIKI in the list of found devices.
Specifications
Bluetooth version ................................................................................................... V2.1 + EDR class 2
Supported profiles ...................................................................... HSP1.1, HFP1.5, A2DP & AVRCP 1.0
Communication distance ............................................................................................................ 10 m
Built-in battery ............................................................................................... Lithium 3.7V 1200mAh
Frequency response ....................................................................................................... 150Hz-20kHz
Output power .............................................................................................................................. 10W
FM radio band ......................................................................................................... 87.0 to 108.0MHz
Signal to noise ratio ................................................................................................................... >65dB
Charging time ....................................................................................................................... 2-3 hours
Playing time.......................................................................................................................... 3-4 hours
Dimensions .......................................................................................................... 125 x 110 x 180mm
2