How To Attach The Stand; How To Remove The Stand - Orion Sales SANSUI HDLCD1955 Manual De Instrucciones

How to attach the stand

NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its back onto a table.
Align the stansd's bottom-plate (supplied) as seen here.
It will fi t in only one direction.
Press it in direction of arrow until 'click'.
Please note " " mark on the stand is facing the LCD
panel side.

How to remove the stand

When you transport this product, remove the stand and put into an attached container box.
For wall mounting, the base must be dismantled. To do this, remove 2 screws from the back (see page 5).
6
Finally secure the bottom-plate with 2 screws
(supplied).
If necessary, remove the screws.
Insert a minus driver etc. to four
slots. Cancel the lock pushing
the driver down carefully toward
each inner side (center direction of
stand). Then remove the stand.