Xtensions SILVER LITHIUM 5.1 Manual De Instrucciones página 15

B. Bass configuration: configuration 2
3. Speaker setting 3: four speakers + subwoofer
A. Bass configuration: configuration 1
B. Bass configuration: configuration 2
4. Speaker setting 4: five speakers + subwoofer
A. Bass configuration: configuration 1
Bass configuration: configuration 2
To set Universal Dolby Digital decoder mode for the speakers, proceed as follows:
1) Adjust the number of speakers and their position with the help of the TEST
function.
2) Make sure your audio input signal is digital (AC-3 or PCM) and set the
corresponding input mode.
3) Switch on your audio device.
4) You can change the bass configuration 1 or 2 with the help of the "Bass"
button on your remote control (in loudspeaker mode).
15
D
GB
F
E
I