Installing And Charging The Batteries - LIVETEC 3B LASER PEN Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

connected from the charging station for cleaning. Disconnect the power cord before cleaning.
• Unauthorised repairs or modifications of the 3B LASER PEN 200 mW may put users or patients in jeopardy.
Therefore repairs may only be performed by the manufacturer or by persons who have been authorised by him.
Unauthorised opening may result in the uncontrolled discharge of laser radiation and will void the warranty.
Please contact the technical service if repair is necessary.
• Operate the 3B LASER PEN 200 mW only in closed rooms at room temperature. The laser warning sign which has
been supplied must be attached to the door.
• Please protect the unit against moisture.
The mandatory safety controls must be performed every 24 months for this laser system.

Installing and Charging the Batteries

The laser pen 3B LASER PEN 200 mW must be charged prior to first use. To do this open the battery compartment
cover on the back of the 3B LASER PEN 200 mW carefully with a pointed object and insert the two rechargeable
batteries supplied. Make sure to match the + and – symbols in the compartment. Replace the battery compartment
cover firmly.
Use only the rechargeable batteries supplied or batteries that conform to the technical specifications indicated
(see the chapter "Technical Data"). Never use normal batteries. Using the wrong rechargeable batteries or normal
batteries may damage the unit.
Connect the charging station supplied to the power source (100 V–230 VAC) and insert the 3B LASER PEN 200 mW
vertically into the charging station. The battery charge status is always shown in the display (5).
When the charging process is complete (the batteries are fully charged) remove the 3B LASER PEN 200 mW from
the charging station.
The display now looks like this:
Charge status
battery ½ full
Important: The 3B LASER PEN 200 mW may not be stored with empty rechargeable batteries. We recommend
removing the rechargeable batteries if you are not intending to operate the unit for a period of >1 month. Rechar-
geable batteries that have been removed must be charged at least every three months. The battery charge control
takes the memory effect into account, so you can charge the device after each treatment without having to worry.
30
Battery empty
Battery is
being charged
Battery is
fully charged
Last revised 16.02.12

Publicidad

Tabla de contenido
loading

Tabla de contenido