Safety Instructions - JENCONS Powerpette Manual Del Operador

POWERPETTE / POWERPETTE
The
(a)
POWERPETTE
(b) Charger; either
220V-240V 50/60Hz 3-pin (UK),
100V-120V 50/60Hz 2-pin (USA),
220V-240V 50/60Hz 3-pin (India) or
(c) Two spare hydrophobic filters, 1x 0.45 µm and 1x 0.20 µm
(d) Bench stand (
(e) Instruction manual

Safety Instructions

The
POWERPE TTE
designed with safety in mind. They are lightweight and balance safely in the hand. The triggers
have been carefully designed to eliminate pressure points and control of intake and delivery is
therefore made easier.
It is recommended when using deleterious liquids that the user wears protective clothing
including goggles and gloves.
appropriate health and safety practices applicable to the liquid being dispensed within your
working environment.
WARNING!
• Only use this instrument within the recommended limits of its chemical resistance.
• Never use with fuming liquids which are incompatible with polypropylene or silicone.
• Never use with highly flammable liquids.
• Observe the reagent manufacturer's safety information.
• Never use the instrument in an atmosphere with danger of explosion.
• When not in use store on bench stand or wall bracket.
• Never use force when in use.
• Should the instrument fail to work to specification stop pipetting and check instructions
headed Trouble Shooting (page 7).
• Only recharge with manufacturer's original charger.
• All repairs must be carried out by an authorized dealer.
• Only use the manufacturer's accessories and spare parts.
• Charger must only be used indoors and protect against moisture.
pipette controller
also has a wall bracket)
POWERPETTE
,
POWERPE TTE
If in doubt ask your safety officer
/ POWERPETTE
Plus
220V-240V 50/60Hz 2-pin (Europe),
100V-120V 50/60Hz 2-pin (Japan),
220V-240V 50/60Hz 2-pin (Australia)
and
POWERPETTE
Plus
3
OPERATOR
Instructions
kit comprises
have been
. Please consult and establish