Velleman WT82 Manual Del Usuario página 2

WT82 – MULTIFUNCTIONAL PROJECTION CLOCK
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the WT82! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Features
• clock with LCD display
• calendar (2000 – 2069)
• time is displayed in 12hr- or 24hr-mode
• temperature is displayed in °C or °F
• alarm and snooze function
• dual projector (time & temperature)
3. Specifications
Clock Precision
Temperature Measuring Range
Temperature Display Precision
Effective Projection Distance
Power Supply
AC/DC Adapter
Battery Life
Calendar
4. Setting the Correct Date and Time
Notes:
The digits will change faster if the ▲ or ▼button is held. The day of the week is adjusted automatically.
Press the ALM ON/OFF button to leave the setting modes for the alarm or the clock/calendar.
The device returns to the normal display mode if no buttons are pressed for at least 30 seconds.
Press the ALM ON/OFF button in the normal display mode or the alarm setting mode to arm the alarm → to arm the
alarm and the snooze function → to disarm the alarm and the snooze function → to arm the alarm → etc.
Hold the TIME SET button for two seconds until the digits for the year start to flash. Enter the year with ▲ or ▼ and
confirm the year with TIME SET. The digits for the month start to flash. Set the month with UP or DOWN and confirm
with TIME SET. The digits for the date start to flash. Set the date with ▲ or ▼ and confirm with TIME SET. The digits
for the hours start to flash. Enter the hours with ▲ or ▼ and confirm with TIME SET. The digits for the minutes start to
flash. Enter the minutes with ▲ or ▼ and confirm with TIME SET. The device returns to the normal display mode.
WT82_v2
± 2sec./day
0 to +50°C // +32 to +122°F
0.1°C
2 to 3m
2 x AA-battery 1.5V (not incl., order code LR6C) for LCD
3V DC / ≥ 150mA (incl., order code PSU03R) for continuous projection
± 1 year
2000 – 2069
2 VELLEMAN