Replacing The Inhalation Valve Disc; Order List - Dräger Panorama Nova P Instrucciones De Uso

4.4.6

Replacing the inhalation valve disc

1. Pull the equipment connector out of the mask body (see
chapter 4.4.2 on page 20).
2. Remove the old valve disc and fasten the new valve disc.
3. Insert the equipment connector in the mask body ((see
chapter 4.4.2 on page 20)).
5 Transport
Transport the full-face mask in a storage box or in the transport
packaging.
6 Storage
Loosen the harness as far as possible (handle tab).

Wipe uncoated visors with an antistatic cloth. Do not wipe coated

visors.
Pack the full-face mask in its bag or a storage box.

Store it in a dry, dust-free place where it is not deformed.

Storage temperature -15 °C to +25 °C.
Keep out of direct sunlight and heat.
Observe ISO 2230 and national directives concerning storage,
cleaning and maintenance of rubber products.
Dräger rubber products are treated with an agent to protect against
premature ageing which in some cases is visible as a grey-white
coating. This coating can be washed off with a brush and soapy water.
7 Disposal
Dispose of the product in accordance with the applicable waste
disposal regulations.
Panorama Nova P
8

Order List

Name and description
Panorama Nova – EPDM – PC – P
Panorama Nova – EPDM – L – P
Panorama Nova – EPDM – PC – P – K/rt
Panorama Nova – EPDM – PC – P – K/rt –
textile
Panorama Nova – SI – PC – P
Accessories
Mask spectacles
Storage box Mabox I
Storage box Mabox II
Storage box Wikov V
Cleaning agents
"klar-pilot" gel
®
Sekusept Cleaner
®
Incidin Rapid (6 L)
other packaging units
(approved by Dekra Exam)
Order Number
R 52 972
R 52 992
R 54 450
R 59 024
R 53 070
R 51 548
R 53 680
R 54 610
R 51 019
R 52 560
79 04 071
R 61 880
upon request
21