Puky Ceety Manual De Instrucciones página 12

How to convert to play-tricycle:
Figure 21: (only CAT S6)
Remove belt system:
z Remove 2 hooks from the backrest
z Unscrew 3 screws
Figure 22: (only CAT S6) Remove cushion.
Take the insert out of the cushion and screw
back onto seat.
Make sure that the seat is properly in
position / check the screws.
Figure 23: (only CAT S6) Pull the back corner
of the backrest to the side to remove it.
Figure 24: Remove footrest
Figure 25: Disable the free-wheel hub so that
the child can pedal by him/herself. To do so,
press the catch ring against the rim until it
snaps into place. Slightly turn the pedal to
make it easier to snap the catch ring into
place.
Figure 26: (only CAT 1SP) Unscrew both
screws on the rear axle and pull axle com-
pletely off. Next, pull the parking brake off the
frame, set the axle back in place and screw it
back on.
Make sure that the axle is properly in
position / check the screws.
Figure 27: (only CAT S6) Pull mesh carry bag
off of the storage tray.
12