König Electronic VID-TRANS600 Manual De Uso página 4

Specifications:
Transmitter:
• Operating frequency band:
• Maximum transmit power:
• Modulation:
• Video input level:
• Audio input level:
• Antenna:
• IR remote, IR output:
• Power consumption:
• Power supply:
• Dimensions:
• Weight:
Receiver:
• Operating frequency band:
• Receiver sensitivity:
• Video output level:
• Audio output level:
• Antenna:
• Power consumption:
• Power supply:
• Dimensions:
• Weight:
System:
• Transmission channels:
• Video bit rate:
• Random ID code:
• Video resolution:
• Operational range:
• Remote control range:
*Actual range depending on environmental conditions
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
2.400 GHz ~ 2.4835 GHz
100 mW (wideband data transmission systems)
16 QAM/QPSK/BPSK
1 V p-p @ 75 ohm
1 V p-p @ 600 ohm (stereo)
Omni-directional
940 nm with on/off keying
1.9 W
5 V/1 A
148x99x29 mm
160 g
2.400 GHz ~ 2.4835 GHz
-80 dB min.
1 ± 0.2 V p-p @ 75 ohm
1 ± 0.2 V p-p @ 600 ohm (stereo)
Omni-directional
1.9 W
5 V/1 A
148x99x29 mm
162 g
80 Channels auto selection
Up to 12 Mbps
Up to 4 million sets
720x480 @ 30 fps (NTSC) or 768x576 @ 25 fps (PAL)
Up to 100 meter (line of sight)*
Up to 100 meter (line of sight)*
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
4