KIKKA BOO NANNA Instrucciones De Uso página 7

EN
IMPORTANT! KEEP FOR FUTURE REFERENCE
1. UNFOLD THE LEGS
Press here to open (Figure 1a).
2. ATTACH THE CRIB
Open the arms for the crib (Figure 2a).
Slot the crib on the rails on the assembled legs (Figure 2b).
3. FOLD/REMOVE THE CRIB
Press on both sides to remove (Figure 3b).
Lift the crib from the legs (Figure 3c).
Press this button to close (Figure 3d).
4. MEASURING THE BED HEIGHT
Adjust the height of your bed to the height of the co-sleeper/crib
(Figure 4a).
To avoid death from the infant' s neck being caught on the top rail
on the side that is next to the adult bed, the top rail must be no
higher than the adult mattress. Always raise the side when not
fastened to the adult bed (Figure 4b).
5. ACCESSING THE WEBBING STRAPS
Insert the 2 "male buckles" to the 2 "female buckles" on the bottom
of the base. Adjust the webbing tape to the correct length. Stretch
the webbing, then lock (Figure 5a).
6. ATTACHING TO THE BED FRAME
The belt goes under the mattress (Figure 6a).
WARNING: Entrapment hazard: To prevent death from
entrapment, the bedside sleeper must be properly
secured to an adult bed, using the attachment straps.
There must be no more than 13 mm gap between the bedside
sleeper and adult bed. Check tightness before each use by
pulling the bedside sleeper in a direction away from the adult
bed. If the gap exceeds 13 mm, DO NOT use the product. Do
not fill the gap with pillows, blankets or other items that are
suffocation hazards. The 2 attachment straps must always be
used in bedside sleeper mode (Figure 6b).
7. REMOVE FROM THE BED FRAME
WARNING: Ensure your baby is not inside the crib when
you detach the crib from the bed frame (Figure 7a).
8. FEATURES
Stand-alone crib (Figure 8a)
Drop-side for easy access (Figure 8b)
Breathable mesh window gives full visibility to your baby (Figure 8c)
Deluxe foam mattress included, size 81 x 47.8 cm (Figure 8d)
Incline bed to help with congestion and reflux. WARNING: The
height difference between the head end and the foot
end of the crib should be no more than 5 cm or one height
level (Figure 8e).
Handy storage shelf to keep your essentials (Figure 8f)
7 height levels to fit any bed frame (Figure 8g)
9. CLEANING AND CARE
Wipe/sponge clean with a mild detergent, not suitable for
machine washing (Figures 9a and 9b).
Wipe clean with a wet cloth or sponge (Figure 9c).
10. LOCKING THE BASE
WARNING: Lock the crib to stop shaking.
Lock the base (no shaking), unlock the base (shaking)
(Figure 10a).
11. SHAKING THE CRIB
Shake by hand (Figures 11a and 11b).
12. MOVING THE CRIB
Lift the crib about 15 degrees to move around easily (Figure 12a).
ENGLISH