Kenwood KDC-X500 Manual De Instrucciones página 9

GETTING STARTED
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA/ PANDORA FRONT/ PANDORA REAR in source
selection. ; OFF: Disables. ( 10)
IHEART SRC ON: Enables IHEARTRADIO/ IHEART FRONT/ IHEART REAR in source selection. ;
OFF: Disables. ( 11)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file disc is
played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.
REM SETTING* (for
REMOTE ID SET Remote control ID list is displayed.
YES: Indicates that this ID is already registered. ; NO: Indicates that this ID is
available.
Turn the volume knob to select an available ID (REM ID1/ ID2/ ID3), then
press the knob to register.
REMOTE ID ID1 DELETE/ ID2 DELETE/ ID3 DELETE: Selects the registered remote control
DEL ID to delete.
YES: Deletes the selected remote control ID. ; NO: Cancels.
* Displayed only when KCA-RC55MR (optional accessory) is connected. ( 32)
)
CLOCK
CLOCK DISPLAY (For
ON: The clock time is shown on the display even when the unit is
turned off. ; OFF: Cancels.
DATE SET (For
DD/MM/YY: Sets the date for marine remote control display.
ENGLISH Select the display language for [FUNCTION] menu and music
information if applicable.
ESPANOL
By default, [ENGLISH] is selected.
/ )
)
ENGLISH
5