TDK-Lambda Z36-24-LAN-L-U Manual De Instrucciones página 2

Class I Warning: The unit is Class I product. To minimize electrical shock hazard, the unit must
be reliably earthed and professionally installed. Any interruption of the protective ground
conductor or disconnection of the protective earth terminal will cause a potential shock hazard
that might cause personal injury.
Energy Hazards Warning: The main output of the unit is hazardous energy (240VA) and must
not be user accessible in the end application.
Hazardous output Warning: There is a potential shock hazard when using a power supply with
an output voltage greater than 60VDC. Do not turn ON power supply when output voltage is
above 60VDC without output bus-bars/or output connectors protection assembled. Turn OFF
power supply or disconnect power supply from AC mains before making or changing any rear
panel connection.
Internal fuse Caution: Internal fuse protect the unit and must not be replaced by the user. In
case of internal defect, the unit must be returned to TDK-Lambda Ltd. or one of their authorised
agents.
OTHER

The ventilation openings on these products must not be impeded. Ensure that there is at
least 50mm spacing between any obstruction and the ventilation openings.