Seiko Epson LX-300 Manual Del Usuario página 3

To change to IBM 2380 emulation, for example, first enter the Printer
Setting mode as described in "Changing the Printer Settings" in
Chapter 2 of your User's Guide. After entering Table B, press the
FONT button until FONT 1 and FONT 2 are on, and the PAUSE light is
flashing. Press the PAUSE button once to enter the Software
submenu. See Table P below for the correct settings. Press the FONT
button to move through the settings in the submenu. The printer
beeps twice each time you press the FONT button while in a
submenu. When the control panel lights match the setting for IBM
emulation (FONT 1, FONT 2, and PAUSE lights on), press PAUSE to
make your selection. When you are finished, turn off the printer.
The following tables show the new or updated submenu items now
available to your printer.
Table F (Character table—IBM 2380 emulation)
FONT 1
O
N
F
O
N
F = flashing, N = on, O = off
Lights
FONT 2 PAUSE
O
O
O
N
N
Character table
PC437
O
PC850
O
PC860
O
PC863
O
PC865
O