Cleaning And Maintenance - Domo DO264AP Manual De Instrucciones

IONISATION
The ionisation function works automatically when the device is switched on. This function causes the
device to spread negative ions. The impurities in the air become heavy due to this electrical charge and
fall to the ground. Dirty dust particles will no longer float in the air, stopping you from having to breathe
them in.

CLEANING AND MAINTENANCE

· Pull the plug out of the socket.
· Clean the outside of the device with a soft damp cloth. Dry the device carefully afterwards.
· Ensure no water gets into the motor part of the device.
FILTER
Replace the filter when the filter reset switch starts to flash (after 2,000 operating hours).
1. Turn the device upside down.
2. Open the base of the device at the bottom by turning it
clockwise.
3. Remove the base. Remove the filter from the device.
4. Insert a new filter.
5. Put the base back on the device. Ensure the arrow on the
base matches the arrow on the device. Tighten the base
anticlockwise.
6. To reset the filter switch
flashing and the counter will restart.
ENVIRONMENTAL GUIDELINES
18
DO264AP
a)
, press and hold the switch for 5 seconds. The indicator light will stop
b)
This symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it must be brought to
the applicable collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
b)
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.