Measurement - TENTECH MPK 102e Manual De Uso

3.6. Measurement

Before to use this instrument the User guide and Safety warnings must be read
•
and understood.
Safety procedures and rules for working near high voltage energized systems
•
must be observed during the use of this equipment. The generated voltages and
currents may be dangerous.
1. Before power-on the equipment, connect the test probes to the
item to be measured and to the front panel terminals, as shown
in figure 2 for current up to 10 A or in figure 3, for the 100 A
range.
 Warning
The clamps in the drawings are only for illustration.
11