MAGLOGIX TML500lb Manual De Instrucciones página 5

Technical data
Prod..-No.:
Designation:
Breakaway force:
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to EN 13155
with safety factor 3:1)
Dead weight of the magnet:
Storage temperature:
Operating temperature:
Markings on the lifting magnet
Additional detailed descriptions for handling and operating conditions can be found on both sides of the lifting
magnet. This labeling must not be modified, damaged or removed, as otherwise the manufacturer cannot be held
responsible for any personal injuries, property damage or accidents resulting from this fact. New labels must be
ordered from the manufacturer if necessary.
41250
TML 500lb Lifting magnet
>750 kg on 10 mm S235
250 kg on 10 mm S235
230 kg on 10 mm S235
3,5 kg
-30°C to +60°C
-10°C to +60°C
>1650 lbs on 0,4" AISI CRS 1020
Colled Rolled Steel
550 lbs on 0,4" AISI CRS 1020
Colled Rolled Steel
515 lbs on 0,4" AISI CRS 1020
Colled Rolled Steel
7,7 lbs
-22°F to +140°F
+14°F to +140°F
5