Using The Remote; Replacing The Remote Control Battery - GiiNii Audiobulb AB-S10 Manual Del Usuario

EASY SETUP

3.Using the Remote

1
3
5
8
9
11
No. Icon Description
Press " " icon to turn on/off speaker sound.
1
Press " " to control AudioBulb lighting level: 100%→50%→25%→5%→off.
2
Press " " button to increase the music volume.
3
Press " " button to play and pause when playing music from docked iPhone/iPod.
4
Press " " or " " button to select previous or next track from docked
5
iPhone/iPod. Also, press and hold "
6 current playing track on iPhone or iPod.
Press " " button to lower the music volume.
7
8
Press " "or" "button to select audio source.
9
2
4
6
7
10
12
13
" or " " button to rewind or fast-forward
English
9
EASY SETUP
Press " " button to mute the speakers, the Speaker LED indicator on
10
docking will blink during mute.
" "
button: allows you to control all AudioBulbs designated to Zone 1.
11
(Factory default setting at Zone 1).
" "
button: When both Zone 1 and Zone 2 are set up and present,
12
" " button to control all AudioBulbs in range.
" " button: You can buy additional AudioBulbs to create Zone 2 (See Pairing,
13
page 12)
Useful tip: For maximum performance, we recommend placing the AudioBulb docking station in the
center of all bulbs, allowing maximum transmitting performance.
·Replacing the remote control battery
1. On the back of the remote control, press the locking tab to the right.
2. Pull out the battery holder.
3. Insert the new battery into the holder. The battery must be placed with the positive charge facing
upwards, as shown in the illustration below.
English
10
press
Positive charge
faces upwards