Connecting The Battery; Prevent Error Codes With Cltsim - CTR CLT1 Manual De Instrucciones

Connecting the battery

Attach the 12V battery clamps to the vehicle battery ensuring the correct polarity
connections; otherwise the CLT1 unit will be damaged.
This means:
red
= positive = plus = 30
Black = negative = ground = 31

prevent error codes with CLTsim

To prevent storing an error code in the vehicle's electronic fault code memory system,
use the simulator (Pt No.: CLTSIM). Connect the simulator to the disconnected control
valve plug.
The CLTSIM has a universal 2-pin connector that will fit all vehicle control valve harness
applications. For vehicles with a single wire harness, connect one of the pin connectors
to ground 31.
10