Using The Battery Indicator; Maintaining And Cleaning The Battery Indicator - Dometic PerfectCharge BI01 Instrucciones De Montaje Y De Uso

Using the battery indicator

7 Using the battery indicator
The battery indicator is switched on and off using the button (fig. 2 5, page 3). It
displays the battery capacity (see chapter "Operating elements" on page 12).
When it indicates the battery is empty, a MCP04, MCP07 or MCP15 PerfectCharge
battery charger can be connected to the battery indicator, and the battery can be
charged directly.
➤ Check that the battery is in good condition.
➤ Check the following:
– The battery housing for damage
– The fluid level in the battery
Fill the battery with the medium specified by the manufacturer, if necessary.
– The pole contacts
Clean off any dirt present.
Connecting the battery charger (fig. 5, page 5)
!
WARNING!
Observe the operating manual for the battery charger.
➤ Connect the power cable (1) for the battery charger to the 230 V AC mains.
➤ Connect the battery charger to the plug (2) for the battery indicator.
➤ Start the battery charger.
8 Maintaining and cleaning the battery
indicator
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
14
PerfectCharge BI01
EN