Inspect The Sensor Cable - Hach Flow Paddlewheel Sensor Manual Del Usuario

Figure 6 Impeller replacement—tee-mount
1 Outlet indication
2 Metal pin
3 Impeller
4 Old shaft
5 O-rings
Figure 7 Impeller replacement—pipe thread
1 Flow arrow
2 Metal pin
3 Impeller
Troubleshooting
Intermittent data
During calibration, data is not sent to the datalog. Thus, the datalog can
have areas where the data is intermittent.

Inspect the sensor cable

W A R N I N G
Potential Electrocution Hazard. Always disconnect power to the
instrument when making electrical connections.
4 Old shaft
5 O-rings
6 Mounting adapter
English 15