Getting Started; Easy Install; Installation; Auto Scan - Datacom TDT-130 Manual De Usuario

GETTING STARTED

Easy Install

If you use the STB for the first time, the "Easy Install" menu appears .
Press "LEFT" or "RIGHT" cursor button to setup the Region and OSD Language.
Highlight "Search ",press the "OK" button to start channel search.

Installation

1 Press the "MENU" button to enter main menu.
Press " LEFT"or " RIGHT " to select "Installation", press "OK" button to enter
2
the Installation menu.
3 Press "EXIT" button to exit.

Auto Scan

1
Press" UP" or " DOWN " to select t he "Auto Scan", press "OK" button to enter
the Auto Scan menu.
2
Press the "LEFT" or "RIGHT" cursor button to select Scan mode, and highlight
"Search" ,then press the "OK" button to start auto scan .

Channel Scan

1 Press " UP" or " DOWN " to select "Channel Scan" and press the "OK"
button to enter the Channel Scan menu.
2 Press "LEFT" or "RIGHT" cursor button to select Scan mode, Scan Band
and Channel No. and highlight "Search", then press "OK" button to start
channel scan .
Power Control
Press" UP" or " DOWN " to select t he "Power Control", press "OK" button to enter
the Power Control menu.
Tuner Power: On/Off
RF Loop-through:
On/Off
Channel Scan mode:
By channel
By frequency
4
English
Easy Install
Region
Spain
OSD Language English
Search
Select Enter
OK
Installation
Auto Scan
Channel Scan
Power Control
Select
OK Enter
EXIT
Auto Scan
TV Channel List Radio Channel List
1 BBC Radio Wales
2 BBCi
3 CBBC Channel 2 BBC Radio Cymru
4 BBC 2W
5 BBC THREE
6 BBC ONE Wales
UHF: 470.0-862.0 MHz Ch No:
Frequency: 490.00 Mhz Modulation:
EXIT
Exit
Channel Scan
Scan Mode
By Channel
UHF
Scan band
Ch No. 22(482.000MHz)
Frequency
482.000
Band Width 8 MHz
Network Search
Off
Search
Signal Intensity
Signal Quality
Select OK Enter
EXIT
Power Control
Tuner Power
Off
RF Loop-through Off
EXIT
Change
Exit
EXIT
Exit
GI:
FFT:
24%
94%
97%
Exit
Exit