Tools Required; Preparing For Installation - ALDI SBX-ALD Manual Del Usuario

Raised Garden Bed
Includes:
4 Composite Wood
•
Grain Timbers
•
4 Joint Stakes
•
8 Joint Brackets
8 Joint Caps
•
•
16 Screws

Preparing for Installation:

Slide a bracket onto the end
of a timber so the edge of
the bracket is level with the
lower concave edge. (See
Image 1). Carefully screw
the bracket in place using
the screws supplied with a
power drill or screwdriver. Do
not over-tighten the screws
as this may damage the
bracket. Repeat this process
on the opposite end of the timber flipping the bracket in the
opposite direction. (See Image 2) Repeat for all four timbers.
2
AFTER SALES SUPPORT
1-800-914-9835
USA

Tools Required:

•
Hammer or Mallet
•
Power Drill or
Screwdriver
1
MODEL: SBX-ALD PRODUCT CODE:
USA
Installation
3
support@frameitall.com
3535 03/2017