Product Introduction - Beper 90.690 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Induction cooker Use instructions

PRODUCT INTRODUCTION

In a short time, heating efficiency can get up to 94.36% from startup to boil. With peculiar
micro-computerized safety-inspection system, it is super safe and reliable. By the cha-
racteristic of cooking with no fire, no smoke and no exhaust, it avoids traditional cooking
safety problem, therefore is liked by many consumers.
Our induction cooker will bring you more safe and health to your family, more cleanliness
to your kitchen.
INDUCTION COOKER WORKING PRINCIPLE Fig. 1
Induction cooker is mainly based on the principle of Electromagnetic Induction Technology. Current
generates variable magnetic field after running through the wire coil. Eddy current is generated at
the bottom when the magnetic field induces the iron pot on the cooker plate. A large amount of ther-
mal energy produced can heat the bottom quickly, thus heating up the food very fast, with thermal
efficiency up to 94.36%.
Safety instructions
General safety
• Read the manual carefully before use. Keep the manual for future reference.
• Only use the appliance and the accessories for their intended purposes. Do not use the appliance
and the accessories for other
purposes than described in the manual.
• Do not use the appliance if any part or any accessory is damaged or defective. If a part or an ac-
cessory is damaged or defective,
it must be replaced by the manufacturer or an authorised repair agent.
• Children should be supervised to ensure that they do not play with the appliance.
• The use of this appliance by children or persons with a physical, sensory, mental or motorial disa-
bility, or lack of experience and knowledge can give cause to hazards.
Persons responsible for their safety should give explicit instructions or supervise the use of the
appliance.
• Do not use the appliance near bathtubs, showers, basins or other vessels containing water.
• Do not immerse the appliance in water or other liquids. If the appliance is immersed in water or
other liquids, do not remove the appliance with your hands.
Immediately remove the mains plug from the wall socket. If the appliance is immersed in water or
other liquids, do not use the appliance again.
Electrical safety
• Keep the appliance and the mains cable out of the reach of children.
• Before use, always check that the mains voltage is the same as the voltage on the rating plate of
the appliance.
• Connect the appliance to an earthed wall socket. If necessary, use an earthed extension cable of
a suitable.
• For additional protection, install a residual current device (RCD) with a rated residual operating
current that does not exceed 30 mA.
• The appliance is not intended to be operated by means of an external timer or separate remote-
control system.
• Make sure that water cannot enter the contact plugs of the mains cable and the extension cable.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido