INDUSTRIAS TECHNOFLEX SILVA MEF-38 Manual De Instrucciones página 16

Vibrador electrónico de alta frecuencia
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1B
OPERATION
READ ALL INSTRUCTIONS
Familiarity and proper training are required for the safe operation of this equipment! Equipment
operated or serviced improperly or by untrained personnel can be dangerous! Read all operating
instructions and the safety notes below. Familiarize yourself with the proper use of this equipment
before operating it.
1.Keep your work area clean and free of clutter.
2.Keep your work area well lit.
3.DO NOT allow children or people other than
the operator to handle power cables, extension
cords or the equipment.
4.DO NOT allow non-essential personnel or
visitors in the work area.
5.NEVER carry vibrator by cord or pull on it to
disconnect it from receptacle. Keep cord away
from heat, oil and sharp edges.
6.Stay alert! Watch what you are doing. Use
common sense. NEVER operate the vibrator
motor when you are tired or while under the
influence of drugs, alcohol, or medication.
7.Keep hands, feet, hair and loose clothing away
from moving parts. They can be caught in
moving parts.
8.DO NOT operate equipment if switch does not
operate properly.
9.DO NOT overreach! Keep proper footing and
balance at all times. Make sure any supporting
structures are strong enough and stable
enough to support your weight and the weight
of any equipment on it.
1B-3
WARNING
10.Wear protective clothing when operating
equipment. Goggles or safety glasses will
protect against eye damage caused by
flying debris.
11.DO NOT force tool. Use the correct tool for
which it is designed.
12.NEVER allow untrained personnel to
operate or service the equipment.
13.Maintain tools with care. Keep vibrator unit
clean for better and safer performance.
Inspect motor cord periodically and if
damaged, have it repaired by an authorized
service facility.
14.NEVER use the vibrator with a defective
switch. If the switch does not turn the motor
"ON" or "OFF", have it repaired by an
authorized service facility before using the
motor.
15.Replace worn or damaged parts with
replacement
recomended for use by INDUSTRIAS
TECHNOFLEX S.A.
16.Any servicing, other than that covered in
this
performed by an authorized INDUSTRIAS
TECHNOFLEX S.A Service Representative.
17.In all the countries the normative ones are
not same, please if in their country the
demand level is not contemplated in this
manual, we request them they indicate it to
us.
Save these instructions!
parts
designed
instruction
manual,
and
should
be
INGLÉS

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para INDUSTRIAS TECHNOFLEX SILVA MEF-38

Este manual también es adecuado para:

Silva mef-50

Tabla de contenido