Publicidad
Pompe centrifughe per liquami
Slurry centrifugal pumps
Pompes centrifuges pour liquides chargés
Kreiselpumpen für Gülle
Bombas centrífugas para aguas residuales
9
6
8
7
1
Suction cone
2
Blades
3
Safety device
7.
Installation
7.1
Inspections before installation
duct correspond to the submitted order.
SL, SLK, SLKC and SD pumps can be driven by electric motor or thermic engine through elastic coupling. When the pumps are coupled with
environmental conditions according to the protection degree and the cooling need of the electric motor. In the choice of the installation
place keep in mind any future maintenance need which may require the motor disassembly. For the installation keep a free space
cooling.
outside the environment.
to ensure the correct engine cooling.
24
MOPL165R0
Characteristics of SLK, SLKC, TLK, TLK series
10
5
3
1
4
Rotating blades seat
5
Wear plate
6
Open impeller
the site chosen must be well ventilated, protected from severe weather and must ensure
the site chosen for the must be well ventilated and the discharge of the engine must be placed
EN
Rotating blade
4
Shear pin
7
Mechanical seal
8
Mechanical seal cover
9
Oil feeder
Manuale d'uso e manutenzione
Instructions for use and maintenance
Manuel d'utilisation et d'entretien
Betriebs-und Wartungsanleitung
Manual de uso y mantenimiento
2
Fixed blade
Screw
10
Pump body
-
Publicidad
Capítulos
