Cleaning And Maintenance - Domo DO266A/S Manual De Instrucciones

Please note: this time is always from the hour when you programme the setting. For example:
it is now 1 pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h
and TIMER OFF on 5.0 h.
Sleep
When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after
30 min. After another 30 min the temperature will increase with another 1°C. The airco will
maintain this temperature for 7 hours. After this time, the airco will go back to the original set
temperature and the "sleep" function will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
Shortcut
With this button you can set and switch on a preferential setting.
If you use a certain setting more often, you can set this by pressing the SHORTCUT button
for three seconds. The apparatus then remembers the settings that are switched on at the
moment of pressing. These settings can include: the user setting (MODE), set temperature,
ventilation speed (FAN) and possibly also the SLEEP setting.
The moment you press the SHORTCUT button, the apparatus will work at the previously
determined settings.

CLEANING AND MAINTENANCE

DRAINING
Permanent drain
During the "dry" mode you can use a permanent drainage.
1. Remove the drain plug and the rubber top.
2. Attach the drain hose on the drain.
3. Make sure the water is drained in a save and permanent way.
Drain code P1
When you don't use the permanent drain, the non recycled condesation water, will be stored
in the water tank.
· When the water tank is full a few beep signals will be heard and on the display the code P1
www.domo-elektro.be
2
1
57
DO266A/S