First Steps
Waterproof case:
Loosen the clamp on the side of the waterproof housing, to
remove the camera.
Inserting microSD card*
• Class 10 SDHC or higher required
• Capacity up to 32 GB
Note: For best performance, please choose a branded microSD card and format it on your compu-
ter before use. Unbranded cards are not guaranteed to work flawlessly.
Installing or removing the battery
A. Remove the battery compartment cover.
B. Correctly install the battery into the camera.
C. Replace the battery compartment cover.
Charging
A. Charging can be done by connecting the action camera to a computer via the usb cable.
B. The action camera can record video while charging
C. Charging of the action camera can be done even when it's powered off.
Turning camera on and off
Press and hold the power switch [
] for 3 to 5 seconds to turn
the camera on or off.
18
*microSD card not included