FHI Brands FHI Heat Platform Tourmaline Ceramic Professional Manual De Instrucciones página 3

TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE OR INJURY:
1. AVOID ANY DIRECT SKIN CONTACT WITH THE PLATES WHILE THE STYLING IRON IS ON OR THE PLATES ARE HOT.
2. USE THE STYLING IRON ONLY FOR ITS INTENDED PURPOSE AS DESCRIBED IN THIS MANUAL. DO NOT USE ATTACH-
MENTS NOT RECOMMENDED BY THE MANUFACTURER.
3. THE STYLING IRON SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN.
4. NEVER OPERATE THE STYLING IRON IF IT HAS A DAMAGED CORD OR PLUG, IT IS NOT WORKING PROPERLY, OR IT HAS
BEEN DROPPED, DAMAGED, OR IMMERSED IN WATER. RETURN THE APPLIANCE TO A SERVICE CENTER FOR EXAMINA-
TION AND REPAIR.
5. ALWAYS SHUT OFF THE STYLING IRON WHEN NOT IN USE.
6. CLOSE SUPERVISION IS NECESSARY WHEN THE APPLIANCE IS USED BY, ON OR NEAR CHILDREN OR THOSE WHO
HAVE DIFFICULTY OPERATING ELECTRICAL APPLIANCES.
7. ALWAYS SET THE IRON ON A DAMP TOWEL OR HEAT RESISTANT SURFACE. DO NOT SET THE IRON ON DELICATE
SURFACES OR NEAR ANY FLAMMABLE MATERIALS.
8. NEVER WRAP THE CORD AROUND THE STYING IRON OR HAVE THE CORD NEAR THE PLATES WHEN THE PLATES ARE HOT.
9. NEVER PLACE A HOT STYLING IRON IN AN ENCLOSED PLACE OR ANY OTHER PLACE WHERE THE HEAT FROM THE
STYLING IRON CANNOT DISSIPATE. WARNING: THE IRON IS EQUIPPED WITH A SAFETY MECHANISM CALLED A "ONE
WARNING
3