BALLIU IRIS Manual De Instrucciones página 4

GENERAL MAINTENANCE PLAN
Weekly: Visual check of the general condition of the sunlounger, removing dirt and ensuring there
are no broken parts or damage that could be a danger to users.
Monthly: Check that the aluminum structure does not have scratches. Check the correct tissue
tension. Ensure that the robustness and structural stability of the lounger is correct. Check the
condition of all the screws. Check the status of wheels, plugs, and plastic stops.
Yearly: Check the condition of the tissues and their tension. Check the correct functioning of the
backrest and regulator. Repair possible deficiencies in paint. Replace the plastic bumpers and
accessories that may be in bad conditions
Wintering and storage: Clean with soapy water and a soft cloth. Remove damp stains, sand and
seawater. Store horizontally in a dry place in stacks of 10 units.
GENERAL CLEANING AND MAINTENANCE CONSIDERATIONS

Do not use aggressive chemicals to clean the sun lounger. Always use products with neutral
PH.

Use a soft cloth to clean the product.

If the equipment is subject to severe use, the maintenance plan must be increased.

Do not use the product before the end of maintenance.

Always refer to maintenance instructions.

Use only Balliu spare parts.

Balliu does not manufacture spare parts for other brands.
EN
BALLIU® FABRIC MAINTENANCE
Cleaning stains.
Stains normally appear where small quantities of rain or wind-borne particles accumulate. Other
marks derive directly from using the product when consuming food, drinks, sunscreens, etc.
The recommended cleaning protocol is as follows:

Spray on soapy water, a household degreasing product, or an ammonia solution.

Lightly rub with a cloth or soft brush using circular movements.

Rinse with plenty of water, using a sponge if required, ensuring no detergent remains on the
fabric.

Dry the fabric with a clean cloth.
Preventing mould stains.
Balliu® fabric is highly mould resistant. However, mould can appear in humid conditions with a
lack of ventilation.
The recommended procedures to prevent mould appearing are as follows:

Allow the fabric to dry in the event of extended exposure to rain or humidity.

Store the furniture in a clean and dry place when not in use or wintering.
If mould stains do appear, follow the previously recommended cleaning instructions.
EN