Operating Instructions; Power Switch - Rimax Baby RB203 Manual De Usuario

User Manual
4. Operation Instructions

Power Switch

1. Press the power switch ON/OFF to start the monitor unit system. The power
indicator (green) will light up.
2. Start the camera unit system, press the power switch
(green) will light up to indicate the unit is now on.
3. Once the monitor unit system is on, the Rimax logo screen will appear and
the system will automatically enter into monitoring status mode. The status
bar as shown in Figure 6 will appear on the display screen.
Volume
+ / Night
Light
Volume -/
Pairing
Figure 5
Note: The Feeding alert option is set to OFF [
picture (fi gure 6). The viewing camera Channel Nº is set to
on the above (fi gure 6). If in the case Channel 1 does not appear, press the
located on the top of the display screen to select Channel 1. The RB203 is set
to the above factory default settings.
4. To turn off the monitor unit system, simply press the ON/OFF button. To turn
off the camera unit system, simply press the ON/OFF button for approximately
two seconds.
Baby Kangoo RB203
EN
Power
Switch
Power
Switch
Figure 6
OFF ] as shown on the above
20
. The power indicator
Status Bar
Sound
Adjustment
as shown