Display Setting - RCA RTB1016WE Manual Del Usuario

The Settings Menu
IP Setting
button to select Auto or Manual, then
Use or
press OK button.
• Auto — Automatically obtain an IP address.
• Manual — Lets you manually confi gure network
settings, such as IP Address, Subnet mask, Default
Gateway, DNS1 and DNS2 settings.
Wireless Setting
button to select Wireless Setting,
1. Use or
and then press OK to confi rm.
select Scan or Manual or Auto
2. Press or
to set.
BD-Live Connection
• Permitted — Allows Internet access with valid
"BDLive" network access approval.
• Prohibited — Never allows BD-Live Internet
access.

Display Setting

1. Press the SETUP button to display the Home
Menu while in full stop mode.
2. Press or button to select Display Setting.
3. When fi nished with your Menu selections, press
the SETUP button to exit Home Menu.
Use cursor button to move focus,
use "OK" button to select
TV
1. In the Display Setting menu, press
to select TV.
2. Press button and press
an option, then press OK button.
3. Press or buttons to select the desired
option, and then press OK button to confi rm
your selection.
4. Press button to go to the previous menu.
TV Screen
16:9 Full, 16:9 Pillarbox, 4:3 Pan and Scan, and 4:3
Letterbox are available for your choice.
16 : 9 Full
• High-defi nition 16:9 formatted video will be
16 : 9 Pillarbox
• The video will be "squeezed" between two vertical
4 : 3 Pan and Scan
• When high-defi nition 16:9 video is played, this
• Some wide-screen DVDs that do not permit Pan
4 : 3 Letterbox
• When high-defi nition 16:9 video is played in this
• This will cause high-defi nition 16:9 video to be
Notes:
• The displayable picture size is preset on the DVD.
SETUP
• If your TV is 16:9 wide-screen (most modern
or button
or button to select
HDMI Resolution
You can defi ne the video output resolution in this
option.
Auto: If your TV is a high-defi nition TV (HDTV), is
EN - 21
displayed correctly on a wide-screen TV (most
modern TVs).
columns on TV screen. This will cause standard-
defi nition 4:3 video to be displayed correctly on
an wide-screen TV, but will distort 16:9 video.
mode clips the right and left sides of the video so
that it can be viewed with correct aspect ratio on
an older analog TV that has 4:3 aspect ratio. This
setting will distort video played on a wide-screen
TV.
Scan mode playback are automatically played in
letterbox mode (black bands that appear at the
top and bottom of the screen).
mode on an analog 4:3 aspect-ratio TV, black
bands appear at the top and bottom of the
screen.
displayed correctly on a 4:3 screen but will distort
standard-defi nition 4:3 video displayed on a 4:3
screen, and will distort video played on a wide-
screen TV.
Therefore the playback picture of some DVDs may
not conform to the picture size selected.
TVs are) , then choose either "16:9 Full" or "16:9
Pillarbox". If your TV is 4:3 (an older analog TV),
then choose "4:3 Pan and Scan" or "4:3 Letterbox".
connected to the HDMI jack on your player
and you want your player to set the output
resolution based on information exchanged
between the TV and your player over the
HDMI cable.