Sabo 92-13 HF Manual Del Operador página 106

24
EN
a) When washing the inside of the cutting deck and the collector channel, the
machine must be on firm ground with:
– the grass-catcher or stone-
guard fitted;
– the operator seated;
– the cutting deck on position
«1»;
– the engine running;
– the transmission in neutral;
– the blades engaged.
Connect a water hose to the
pipe fitting (1), and running
water through for a few min-
utes , with the blades moving.
IMPORTANT
clutch:
– prevent the friction from coming into contact with oil;
– do not direct jets of high-pressure water directly onto the clutch unit;
– do not clean the clutch with petrol.
Take off the grass-catcher, empty and rinse it, and then put it in a position where it can
dry quickly.
b) To clean the upper
part of the cutting deck:
– lower the cutting deck
completely (position
«1»);
– blow a jet of com-
pressed air through the
right and left guard
slots.
To avoid umpairing the efficient working of the electromagnetic
HOW TO USE THE MACHINE
1