Installing The Microphone - so MEX-N7300BD Manual De Instrucciones

Common connection
Red
Yellow
continuous power
12
supply
15 switched power supply Red
When the positions of the red and
yellow leads are inverted
Red
Yellow
12 switched power supply Yellow
continuous power
15
supply
When the car without ACC position
Red
Yellow
After matching the connections and
switching power supply leads correctly,
connect the unit to the car's power supply. If
you have any questions and problems
connecting your unit that are not covered in
this manual, consult the car dealer.
Red
Yellow
Yellow
Red
Yellow
Red
Red
Yellow

Installing the microphone

To capture your voice during handsfree
calling, you need to install the microphone
.

Clip (not supplied)
Cautions
• It is extremely dangerous if the cord
becomes wound around the steering
column or gearstick. Be sure to keep it and
other parts from interfering with your
driving operations.
• If airbags or any other shock-absorbing
equipment is in your car, contact the store
where you purchased this unit, or the car
dealer, before installation.
Note
Before attaching the double-sided tape , clean
the surface of the dashboard with a dry cloth.
Using the wired remote control
1
To enable the wired remote control,
set [STR CONTROL] in [SET STEERING]
to [PRESET] (page 20).


37
GB