Locking The Cooler; Setting The Temperature; Switching Off The Cooler; Defrosting The Cooler - fridgerite FR 35 DC Instrucciones De Uso

FR35 DC, FR35 AC/DC
6.6

Locking the cooler

➤ Close the lid.
➤ Press the lock (fig. 1 1, page 2) down, until it latches in
place audibly.
6.7

Setting the temperature

➤ Press the "SET" button (fig. 2 4, page 2) once.
➤ Use the "+" (fig. 2 6, page 2) and "–" (fig. 2 7, page 2) but-
tons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
temperature is displayed again.
6.8

Switching off the cooler

➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
6.9

Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the
vaporiser. This reduces the cooling capacity. Defrost the device in
good time to avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them
cool.
➤ Switch off the device.
EN
Operation
29