Changing The View By Using The Aspect Button - HP SL4778N Manual De Instrucciones

Changing the View by
Using the Aspect Button
Press the Aspect button on the remote control to select
an option for the dimensions of the TV picture image.
The options that are available for selection depend on
the current input source.
TV image (Aspect)
Input
signal 4:3
4:3
16:9
The Aspect options are:
Auto automatically shows the correct aspect
■
ratio, based on the content.
16:9 shows widescreen TV in its recorded format,
■
or a 4:3 ratio image stretched to fit the screen
with no center aspect correction.
4:3 shows the standard 4:3 ratio image in the
■
center of the TV, with dark bars on the left and
right of the screen, or shrinks widescreen pictures
horizontally.
Zoom1 stretches the image vertically. Suitable
■
for stretching widescreen DVD movies to reduce or
eliminate horizontal dark stripes at the top and
bottom of the screen.
Zoom2 stretches the image both vertically and
■
horizontally, and may clip the top, bottom, and
sides of the image.
Panorama stretches the picture horizontally, if
■
necessary, to fill the screen; the center of the
screen has aspect correction. Suitable for
stretching a normal 4:3 ratio image to fill the
screen.
38
HP MediaSmart HDTV User Guide
16:9 Zoom1
.
When the input source is HDMI, the
Panorama mode is not available. When the
input source is PC, the Zoom1, Zoom2, and
Panorama modes are not available.
Zoom2
Some stations transmit Standard-definition
programming directly in 16:9 aspect ratio
so that the image has embedded dark side
bars. For that type of input signal, the
Panorama mode is not available, and the
Zoom1 and Zoom2 modes do not eliminate
the side bars.
Use the Aspect Ratio option in the onscreen display
Picture menu to set the default aspect; see "Using the
Picture Menu" on page 52.
n
Panorama
Not available
n