Operation - VWR VAPOUR-Line eco 25 Manual De Instrucciones

Operation

1. The autoclave should be placed in a room accessible by the operator only
2. Check that the heating element inside the vessel is fully covered by water
3. Check that the water tap (Pos.8 page7) is closed
4. Connect a suitable container to the hose connection of the condensate discharge port (Pos.7 page 7)
5. Insert the basket with the items to be sterilised
6. Pull the safety ring placed on the left side of the cover to freely move the cover
7. Close the cover by using the handle
8. Turn on the autoclave by the main switch
9. The display will show the main menu:
10. Select the desired sterilisation cycle. If you want to modify the sterilisation parameter please follow the
procedure described in the following chapters
9