Putting Into Service - BOMANN VL 1137 CB Manual De Instrucciones Y Montaje

Ocultar thumbs Ver también para VL 1137 CB:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
8. Secure the wire mesh guard with the fastening screw
(12) and nut (9).
9. Close the attachment hooks.
Position
The ideal position is a non-slip, flat surface.

Putting into Service

Electrical Connection
• Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
• Connect the device to a duly installed protective contact
socket.
Use
Basic Settings
Set the blower inclination angle before starting the device.
• Hold the motor housing with both hands and tilt it care-
fully to the desired position. It clicks audibly into place.
CAUTION:
The tilting angle is about 30 degrees.
WARNING:
• Always remove the mains plug before cleaning the device.
• If you need to remove the safety guard: Always switch the de-
vice off and remove the mains plug.
• Under no circumstances should you immerse the device in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Clean the outside of the device with a dry cloth without
any additives.
• If the device is very dirty wet a cloth with water and then
wipe the device dry once you have finished.
VL1137CB_IM_new ab PO32220
Operation
To select the speed, use the pressure switch on the front:
0 off
1 slow
2 fast
To shut off the device, select the position 0.
Fan Setting
You have two options:
• Stationary
1. Shut off the device.
2. Pull the control knob upwards.
3. Use the carrying handle to place the device into the
desired position.
• Oscillating
1. Shut off the device.
2. Press the control knob.
NOTE:
The device rotates automatically in the range of
about 90 degrees.
3. To turn off the function, shut off the device and pull
the control knob upwards.
Cleaning
• Clean the appliance as described.
• We recommend that the appliance is kept in its original
packaging if you do not intend to use it for long periods.
• Always store the appliance out of the reach of children,
in a well-ventilated and dry place.
Storage
16.11.17
27

Publicidad

Tabla de contenido
loading

Tabla de contenido