Cleaning; Removable Accessories; Grinder; Motor Housing - Profi Cook PC-EKM 1205 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
WARNING:
• Always disconnect the power plug before cleaning.
• Never immerse the appliance in water for cleaning. Do not
pour water into the mounted container for coffee beans. It could
cause an electric shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive objects.
• Do not use any sharp or abrasive cleaning agents.
• Clean the appliance regularly. Coffee beans leave an oily
residue. These deposited oils turn rancid. The rancid oils
negatively influence the taste of your coffee.
• Espresso and other dark coffee roasts have a higher oil
content, which requires more frequent cleaning.

Removable Accessories

1. Turn the coffee beans container counterclockwise to
remove it. Wipe it with a damp cloth.
2. Clean the coffee grounds container and lids in a warm
rinse bath.
3. Allow the parts to dry completely before refitting them.
4. Place the container for the coffee beans on the grinder.
Observe the symbols. Place the container with the sym-
bol
above the symbol
on the appliance. Turn the
container clockwise until it stops. It must audibly snap in.
5. Place the coffee grounds container with the lid in the
motor housing until it stops.
Problem
Possible Cause
The appliance is not
The appliance has no power supply. Check the outlet with a different appliance.
working.
Your appliance is equipped with a
safety switch. This prevents an
accidental starting of the engine.
The overheating protection has been
activated. The motor is too hot.
The appliance is defect.
PC-EKM1205_IM

Cleaning

Grinder

1. Loosen the cap of the grinder counter-clockwise with a
small turn. Remove it.
NOTE:
This process could be difficult due to jammed bean
remains.
2. Clean the upper grinding cone with the cleaning brush.
3. Adherent powder in the grinder can also be removed
with the cleaning brush. Use a vacuum cleaner to re-
move the coffee powder residues from inside the grinder.
4. Replace the cap of the grinder. Turn it a little clockwise
until it stops.

Motor Housing

For cleaning of the housing, only use a damp cloth and mild
detergents.
• Clean the appliance as described. Let the accessories
dry completely.
• We recommend that you keep the appliance in the
original packaging, if you do not want to use it for a
longer period.
• Always store the appliance out of reach of children in a
well ventilated, dry place.

Troubleshooting

Solution
Make sure that the container for the coffee beans is
mounted correctly.
Let the appliance cool down for at least 30 minutes
before switching it on again.
Consult our service department or an expert.

Storage

29.10.19
33

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido