Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KCH-240
Hydraulic Cable Cutter
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the tool, These carry important safety information.
If unreadable or missing, contact the agent to replace.
2.
This product is not a toy, keep it out of reach of children.
3.
Do not slide your fingers in the blade profile.
4.
Do not put your fingers in the head of the tool when you slide the blades inside it.
Your fingers could be pinched very severely.
5.
Do not use the tool without blades
6.
Do not cut on live cables or conductors
7.
During cutting process, make sure the lock latch completely closed for locking the
cutting head.
8.
Do not adjust the pressure at mind, if there is less/no pressure, please deliver the tool
to distributor/ manufacture for inspection and repairing
9.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THIS INSTRUCTIONS
UNDERSTAND YOUR TOOL
THC-20 is the tool for cutting hard metal wire and rod. It owns many advantages
such as good design, easy operation, high pressure, high efficiency and etc. It is a
perfect tool to be used in electric construction site and other outdoor site.
1. Specification
Item No.:
Cutting force:
Rated pressure:
Cutting range:
Stroke:
Capacity of oil:
Length:
Ambient temperature:
Net weight
Package:
Note: prohibit to cut chilled steel and piano wire
THC-20
60KN
63Mpa
Steel rope:20mm
Mild iron rod:13mm
Rebar:14mm
Copper stranded wire: 20mm
Aluminum wire: 20mm
Armored cable: 20mm
ASCR:21mm
Steel wire: 20mm
26mm
70ml
355mm
-20℃～40℃
2.9kg
Plastic box
www.grupotemper.com
Publicidad
Tabla de contenido
