English
Weight-Only Measurement
This scale can also be used as a conventional weight-reading scale. You can
simply step on the scale to measure your current weight without opening the
EufyLife app.
Maintenance
Regularly clean the scale with a dry or slightly dampened soft cloth.
- Do not wash the scale with water or immerse it in water.
- Never use detergents to clean the scale as this may cause it
to malfunction or discolor.
Troubleshooting
Error Message
Error Display
Description
Overload. The device will power off. Stop using this scale for measurement.
Low battery. The device will
power off.
Measurement failure.
04
Solution
Replace all three batteries at the same
time.
• Step barefoot and keep full contact
with the electrodes.
• Stand still until the measurement on
the LED display locks.
When Measuring
Issue
Cause
Abnormal measurement
• Incorrect posture.
results:
• Too high
• Too low
• Device is placed on
soft carpeting or
• Huge difference
uneven surface.
between two recent
measurements
• Batteries not
LED display does not turn
installed.
on after stepping onto the
scale.
• Worn batteries.
• Taking
Scale does not proceed to
a measurement while
analyse body composition.
wearing shoes or
socks.
Specifications
Product Model
T9146
Power Source
4.5 V (3 × AAA batteries)
LED Display
67 × 29 mm / 2.6 × 1.2 in
Measurement Unitse
Pound / Kilogram
Unit Increments
0.1 lb / 0.1 kg
Body Fat Unit Increments
0.1 %
Body Water Unit Increments
0.1 %
Muscle Mass Unit Increments
0.1 %
Measurement Range
11-397 lb / 5-180 kg
Temperature: 5 - 40 °C
Working Environment
Humidity: 20 - 90% RH
Temperature: -20 - 50 °C
Storage Environment
Humidity: <= 90% RH
Operating Frequency Range
2402 - 2480 MHz
Radio-Frequency Power
4 dBm
Dimension
280 × 280 × 23 mm / 11.0 × 11.0 × 0.9 in
Net Weight
3.31 lb / 1. 5 kg
English
Solution
Step onto the scale barefoot and
stand still.
Place the device on a hard and flat
surface.
• Install three new batteries.
• Replace all three batteries at the
same time.
• Stand barefoot on the scale and
keep feet in full contact with
the electrodes when taking a
measurement.
05