Hahnel CAPTUR Instrucciones De Operación página 9

Parameters
3
4
5
6
7
Sensor triggering
The Captur Module – Pro has build in sensors which can trigger the camera.
Toggle Button
Use
to select the required sensor (e.g.
button to 'Start' the sensor triggering. The Captor Module – Pro is now ready
to trigger camera and, LED
Module – Pro is triggered by the sensor, it will trigger the camera to take
photo and LED
"clap you hand" and the Captur-Pro will trigger. You may need to adjust the
13
"sensitivity"
Sensor
17
18
19
20
21
Note:
• More information available on www.hahnel.ie
• Wrong connection of external AUX sensors may damage the Captur
Module –Pro.
Captur Module - Pro
Description
Delay before 1st shutter
is released
Burst/bulb time
1st Interval Time
= Number of
shots for 1st Interval
= Number of
times program is
repeated
2nd Interval Time
28
< or > to move from one sensor to the other
25
shows steady green. When the Captur
25
shows red momentarily (e.g. with "SOUND" started
to trigger the sound)
Description
Trigger sound sensor
Align Captur Module – IR
24
with sensor to create a
beam
Trigger light sensor
Align any Laser Pen (sold
separately) with sensor
create a laser beam
Triggered by external sensor
connected to AUX socket
Setting
0s to max 99hrs 59'min
59"s (in 1s increments)
1s to max 99hrs 59'min
59"s (in 1s increments)
1 to 999 and ---
(unlimited)
1s to max 99hrs 59'min
59"s (in 1s increments)
17
). Now press
Comments
23
Adjust sensitivity
Breaking the beam will trigger
29
the Module - Pro
22
Adjust sensitivity
Breaking the beam will trigger
22
to the Module - Pro
Refer to www.hahnel.ie for
more info
Start/Stop
13
level
13
level
7