Start Settings - SPE SEGUNDA SERIE Manual De Usuario

18.19 START Settings.

This menu item allows to choose, between the two possible Standby/Operate states:
• Standby turns the amplifier in the Main Display Page after its power-up. From
this display page the user can perform all the operations described till now.
• Operate turns the amplifier in the OPERATE Mode (that will be described later)
after its power-up. From this display page the user can, eventually, go to the
Main Display Page.
To make these changes, press the [SET] key:
To leave this menu, the QUIT option has to be chosen and then confirmed using the
[SET] key.
Note: this setting will be applied after the next power-up of the linear amplifier and will remain
till any eventual future changing.
Manual de usuario
[SET]
Página 64 de 64
EXPERT 1K-FA