Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Motor
Spindle speed
Chisel capacity
Chisel shank
Maximum chisel stroke
Distance, fence to center chisel
Chuck capacity
Bushing size
Long-ways
Table movement
Cross-ways
Table size
RECEIVING THE MORTISER
Remove mortiser and stand from the shipping cartons. Check for damage and ensure all parts
are intact. Any damage should be reported immediately to your distributor and shipping agent.
Before assembling, read the manual thoroughly, familiarizing yourself with correct assembly and
maintenance procedures and proper safety precautions.
Contents of shipping cartons:
Stand carton
1 Stand
1 Hardware package
Mortiser carton
1 Mortiser with motor
1 Operating handle
2 Handwheel handles
1 Chuck key
1 Chisel
1 Wooden table
INSTALLATION
The mortiser should be secured to the stand with four M12 x 120 hex head screws (provided)
using the holes in the base. Make sure there is enough room on each side of the mortiser for the
size stock you plan to use.
WARNING: The mortiser has a two-prong plug and requires a grounded outlet.
In the event of a malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. If you are not sure whether your outlet is
properly grounded, consult a qualified electrician.
See Namepl ate 750w (input), 1PH, (
See Namepl ate (
rpm )
6.35—25.4mm
19.05mm
220mm
140mm
16mm
19.05mm
170mm
140mm
400x150mm
５
EN
V,
Hz)
Publicidad
Tabla de contenido
