Continue to How to Use
9
Release pressure – Exercise the Slow
Release tab and Fast Release button to
discharge pressure. If the foam level is too
high, let bottle set for awhile before
discharging. To be safe, always nalize the
pressure release process by depressing
the blue Fast Release button.
WARNING! Pulped beverages may clog the pressure release valve!
Tips for using the Drinkmate - Spritzer:
• For high foaming beverages like beer, half- ll the bottle. Then carbonate using short bursts (~0.25 sec.) allowing the bubbles to settle between triggers.
• For low foaming beverages, a longer triggering time can be used. Learn from experience how to limit foam from over owing.
• Experiment to nd your preferred carbonation level for di erent drinks. Stop carbonating when a discharge whooshing sound is heard to save CO2.
• For water or low sugar beverages, use the Fast Release button directly to save discharging time.
• Before discharging the pressure, gently shake the bottle with Fizz Infuser on to allow a higher CO2 absorption into your beverage for better taste.
• Drinkmate Spritzer can also use larger 60L (14.5oz/420g) CO2 cylinders. An optional accessory stand is available for converting it to countertop use.
• CO2 cylinder exchange program from Drinkmate: Empty CO cylinders may be exchanged for full ones at any participating retailer or online. For more
information, please email: sales@idrinkproducts.com, or use the phone Number listed on manual.
• If using the larger 14.5oz CO2 (60L) cylinder with Spritzer in hand-held mode, be very careful not to damage the cylinder holder and frame due to the
extended length. We suggest buying the optional accessory stand so you can adapt the Spritzer for countertop use with the larger CO2 cylinder. Please check
www.idrinkproducts.com for more accessory details.
10
Enjoy your drink – Turn the Fizz Infuser
counter-clockwise to disconnect from
the bottle. Enjoy the sparkling drink.
Use the bottle cap to store it in the
fridge or take it on the go.