Connections; Connecting Inputs And Outputs - PIONEER DJ TORAIZ AS-1 Manual De Instrucciones

Connections

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Connect the power cord after all the connections between devices have been completed.
! Be sure to use the included power cord and AC adaptor.
! Refer to the operating instructions for components to be connected.
! Connect this unit and your computer directly using a USB cable.
— Use a USB cable which conforms to USB 2.0.
— USB hubs cannot be used.

Connecting inputs and outputs

Headphones
Powered speakers
How to use the cable hook
Hook the connection cable of the AC power adaptor to avoid accidentally
disconnecting it from the unit.
! If the connection cable of the AC power adaptor is unplugged while
you are playing the synthesizer, the sound will stop abruptly.
1 Fit the connection cable of the AC adaptor into the
cable hook.
Secure the cable into place.
8
En
Foot switch MIDI keyboard,
sequencer, etc.
Synthesizer, sound module, etc. Computer
2 Connect the plug of the connection cable to the
[DC IN] terminal. If the cable on the left side of the
cable hook is too long, tighten it moderately.
Pull gently to tighten.
Plug in.
AC adaptor
(included)
Power cord
(included)
To power outlet